Interview Questions for Structural Engineers Part C

Interview Questions for Structural Engineers Part C

CivilDigital brings you series of frequently asked and discussed multiple choice and interview questions for the benefit of every civil engineering student or job seeker for Interview & Exam Preparation. This part concentrates on Questions on general interview questions for structural engineers.

Interview Questions for Structural Engineers

Please enter your mail id before submitting to get the correct answers on your mail.

1. 
A reinforced concrete beam is subjected to the following bending moments, the design bending moment for limit state of collapse as per IS code is ____

  • Dead load - 80kNm
  • Live load – 30kNm
  • Seismic load – 10kNm

2. 
According to Whitney’s theory, the maximum depth of concrete stress block in a balanced RCC beam section of depth ‘d’ is

3. 
In case of 2-way slab, the limiting deflection of the slab is

4. 
A metal bar of length 100mm is inserted between two rigid supports and its temperature is increased by 10 ᵒC. If the coefficient of thermal expansion is 12 X 10ᶺ6 per ᵒC and the Young’s modulus is 2 X 10ᶺ5 MPa, the stress in the bar is

5. 
Influence line for redundant structures can be obtained by _______

6. 
Creep strain is

7. 
In a RC member, the best way to ensure adequate bond is to

8. 
Minimum shear reinforcement in beams is provided in the form of stirrups to resist ____

9. 
A Cantilever beam curved in plane is subjected to lateral loads will develop ___________ at any section.

10. 
Shear strength of concrete in a reinforced concrete beam is a function of which of the following:

  1. Compressive strength of concrete
  2. Percentage of shear reinforcement
  3. Percentage of longitudinal reinforcement in tension in the section
  4. Percentage total longitudinal reinforcement in the section.

Be sure to click Submit Quiz to see your results!

Please enter your mail id to get the correct answers on your mail. (We don't misuse or display your mail id to anyone)

Name

If you are preparing for any competitive exams like government tests for engineer post/ IES/ GATE this series of civil engineering questions will be helpful. Civil Engineering Interview & Exam Preparation will guide your now that Civil engineering is a professional engineering and discipline that deals with the design, construction and maintenance of the physical and naturally built environment.

Civil Engineering Interview & Exam Preparation series will describe that including works such as bridges, roads, canals, dams and buildings. Learn Civil Engineering by Civil Engineering Interview & Exam Preparation series.

Brittle Cracking of a FRC Beam
Brittle Cracking of a FRC Beam

As a civil engineer, fresher or professional, it is necessary that you are familiar with basics and general topics in civil engineering to excel in any job interview or in competitive exams in the civil engineering domain. This series of multiple choice questions/ interview questions will help you revise and enhance your knowledge in various civil engineering basic concepts. 

Civil Engineering is said to be the biggest and most versatile branch among all the engineering branches. Our previous monuments and structures speak plenty concerning sensible development of the civil engineering technology of this country. Civil Engineering is accepted as one largest branch among all the engineering branches.